StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Programmable Logic Controller - Assignment Example

Cite this document
Summary
This assignment "Programmable Logic Controller" presents unitary PLC devices that have all the characteristics of a simple system in a consolidated unit form. The characteristics include a unit for power supply, input and output modules, and the main module having the CPU…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER95% of users find it useful

Extract of sample "Programmable Logic Controller"

  • Task 1:
    • Unitary PLC
      • Design and Characteristics

Unitary PLC devices have all the characteristics of a simple system in a consolidated unit form. The characteristics include a unit for power supply, input and output modules and the main module having the CPU (central processing unit). This type of PLC’s is fixed directly on the module or the machine under its control.

      • Advantages of Unitary PLC

They unitary PLCs are small, but carry all the essential elements of the system into a single unit. Additionally, they are easily portable and accessible. Thirdly, they are the most cost effective PLC types.

      • Disadvantages

One of the disadvantages is that they not expandable. Secondly, failure in a single unit leads to the need to replace the entire unit. The third disadvantage is that they are very basic and have limited performance.

      • Application of Unitary PLC

Unitary PLC devices are used in any application, which does not need much input or output.

    • Modular PLC
      • Design and Characteristics

Modular PLC is a set of modules, positioned together to construct a system. The simple modules of the device have power supply units, the main module carrying the CPU, the input and the output module.

      • Advantages of Modular PLC Systems

The capacities of the input and output terminals are expandable, making it easy for them to cope with the transformations in the hardware system. Any failure in one component does not lead to failure in the entire system, so the cost of recovery from the failure is reduced.

      • Disadvantages

The main disadvantage of modular PLC’s is the high cost of their installation.

      • Application of Modular PLCs

Modular PLC’s devices are required in applications with more input and output. It is widely applied in the industrial sector for regulating the process lines.

    • Rack-Mounted PLC
      • Design and Characteristics

The rack mounted PLC system similar to the modular system, except that these units (modules) are on normal cards. The modules are able to relay information to each other through the rack.

      • Advantages of a Rack-Mounted PLCs

It is easy to modify and expand the rack mounted PLC. Secondly, they possess more input and output points compared to other PLC types. Any failure in one feature means that only the affected part should be changed, this reduces the cost of repair.

      • Disadvantages

They are the most expensive PLC types.

      • Applications

This PLC type is extensively applied in the industrial sector. This is primarily due to capacity of input and output points, which the PLC system can carry, and because of it is able to communicate across networks.

Task 2:

    • Input and Output Devices
      • Mechanical Switches

The PLC devices display switches and wait for the sending of a signal from specific switches. The switches usually work in two approaches, normal opening, and normal closing. With the normal open switches, there is a signal sent to the switch but is not received by the PLC because of the existing open circuit. When the circuit is closed, the signal reaches the PLC, and the PLC is able to process the data. In the normal closed switch, a signal is continually received at the PLC and as the switch is formed, the circuit is made, and there is no more receipt of signals in the PLC. An example of this is the mechanical switch in the pneumatic piston with limit switches.

      • Non-mechanical Digital Sources

This is the sensor inputs, which requires no direct mechanical procedure to work like the powered switch. These switches are advancements over the mechanical switches. They lack moving parts in their structures and are faster compared to the mechanical switches, so they are applicable in computing, for example, a transistor. The mechanism of a transistor operation is adding electrical charges to close a switch to enable the flowing current. With the removal of the electrical charge, the switch opens up so no current flows. The second example is the optical sensors. They send out optical signals to the reflector, which the PLC device interrupts to process and act. The optical sources use Infrared lights instead of the ordinary as light spectrum. This prevents natural sources of light from interfering.

    • Transducers

A transducer is a common type of sensor naturally applied in taking measurements. The main use of a transducer is to converts energy from one form to another. They naturally convert energy from mechanical to electrical. The electrical energy is then used for reporting to the PLC devices.

    • Relays

The relays are items used as output units for the PLC systems. The PLC only uses the information given to it from the available inputs. It executes a program to activate the output. An example of this is the thermostat, which controls the temperature within a specific range. When a temperature reaches the limit, the PLC processes and sends signal to the relay to the switch. This turns off the A/C unit.

Task 3:

    • Twisted Pair Cables

The twisted pair cable used in the PLC’s is made up of two insulated wires. The wires are intertwined together, to help minimize the noise from external sources. Twisted pair is suitable when moving balanced differential signals in the PLC’s. This gives valuably wide bandwidth system. There are two types of twisted pair cable, shielded and unshielded twisted-pair (STP) and (UTP) respectively (Laughton & Warne, 2003). The shielded pair is the most common, having two insulated wires intertwined together. This includes the data communication wires and the typical telephone wires.

      • Preferred Qualities

It has a foil jacket to prevent cross talks and noise from the PLC environment and to eliminate the inductive and the capacitive coupling.

    • Coaxial Cable

Coaxial cable is a cable for high-frequency data transmission in PLC’s, which carries one solid-copper core. The cable has a high transmission capability, about 80 times that of the twisted-pair according to Cox (2006). It is applied in the PLC devices to deliver television signals. It is also used in the transmission of data in computers networks. It is cost effective for short connections within a radius of 10 m in home based network.

      • Preferred Qualities

Coaxial cables are widely applied in feed lines, which are the links between various PLC devices such as radio transmitters and receivers. They are also used in computer networking, digital audio broadcast, and the spread of television signals. Furthermore, they prevent interference with the PLC input and output signals due to outer electromagnetic effect.

    • Fiber Optic Cables

Fiber optic is an assembly of fibers used in PLC data communication. It carries a number of optical fibers used to transmit data. Each fiber component is separately covered with a plastic covering. It is then carried in a protected tube. Data is transmitted in the fiber optic cable as pulses of light, going through tiny glass tubes with a high transmission capacity, about 26,000 times the speed of transmission in the twisted-pair cable (Petruzella, 2005).

      • Preferred Qualities

Fiber optic cables are lighter and more reliable in the data transmission through the PLC devices. They convey information through beams of light. This implies that they use the speed of light instead of electrical pulses.

    • Ethernet

Ethernet is a network cabling system used in the PLC connectivity has a well signaling specification. It is a technology of a physical and data link layer for local area network.

      • Preferred Qualities

Ethernet minimizes electrical noise apart from providing electrical isolation. Some networks stress on delivery of transmitted information through PLC, but Ethernet detects collision. The future safety and reliability of Ethernet is guaranteed.

Task 4

    • Internal Architecture

The architecture of a typical PLC is formed with a CPU, storage media (devices), memory, opto-isolators, input, and output units, flags and shift registers.

Figure 1: Internal Architecture of PLC

The CPU is the position of the main processing in the PLC device. The PLC uses the storage devices for storing the processes information. The storage devices include hard drive (Laplante, 2001). The memory of the device (RAM) is used for temporary memory for the running of programs. It enables the CPU to access random portions of the memory upon demand. The Opto-isolator in the PLC device is a protective device for transferring electrical signals from between input and output devices (Petruzella, 2005). It protects the internal circuit in the PLC against the possible quick change in voltage levels. The input and the output ports are connected to the input and output devices. The flag is the data type applied in the PLC device, referring to on and off'. The shift register is a set of information from the former cycles of program kept in the PLC, which later reflects on other running programs.

Task 5:

    • Operational Characteristics

Scanning refers to the process, which the PLC undergoes, beginning from the input and to the output. The scanning cycle runs as shown below:

Reading input  running the program  processing the information running the self-diagnosis writing output.

      • Scanning Input

This is where the PLC continuously checks for the input signal.

      • Executing Logic Operation

The PLC makes the program ready but it does not send the program.

      • Continuous Update of Outputs

The PLC reads the program after which it passes the program on. In continuous updating of output, the CPU scans the inputs in a specific order using a build-in delay.

      • Scan Time

The PLC checks how the program operates. The PLC finally sends signals to the appropriate outputs. The CPU does scanning of each input before it determines the program (Kandray, 2010). This enables the CPU to process only the valid input without a negative effect on amount of time taken to process while there are many input data, each having a delay.

Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Programmable Logic Controller Assignment Example | Topics and Well Written Essays - 1500 words, n.d.)
Programmable Logic Controller Assignment Example | Topics and Well Written Essays - 1500 words. https://studentshare.org/design-technology/2109390-programmable-logic-controller
(Programmable Logic Controller Assignment Example | Topics and Well Written Essays - 1500 Words)
Programmable Logic Controller Assignment Example | Topics and Well Written Essays - 1500 Words. https://studentshare.org/design-technology/2109390-programmable-logic-controller.
“Programmable Logic Controller Assignment Example | Topics and Well Written Essays - 1500 Words”. https://studentshare.org/design-technology/2109390-programmable-logic-controller.
  • Cited: 0 times

CHECK THESE SAMPLES OF Programmable Logic Controller

The Increasing Accounts of the Cases of Attacks on the Cyber Security

The paper "The Increasing Accounts of the Cases of Attacks on the Cyber Security" discusses that while attacking various software, the computer worms can function without attaching themselves to the existing programs, not like computer viruses.... Computer worms can be such huge threats to cybersecurity....
7 Pages (1750 words) Research Paper

Supervisory Control of A Bytronics Conveyor System

The blueprint and accomplishment of a flexible manufacturing structure ran podium centered on a Programmable Logic Controller (PLC) as well as a desktop based illustration man- mechanism interface as well as statistical acquisition component.... This paper seeks to design and produce a model Bytronics Conveyor System that can be used to detect objects like baskets and control the conveyor system and research and recommend on sensors for use in a real conveyor system....
15 Pages (3750 words) Research Proposal

NPI, Technology, and Application of PLCs

New Product Introduction (NPI) is a process that involves joint products that are new in the market; these products come as a result of an idea from different people, which stages an aspect of mass production due to the emerged final quality artifact.... NPI originates from.... ... ... s' and clients' suggestions after a certain corporation realizes that there are customers in need of a given product, thus, creating the demand facet....
4 Pages (1000 words) Essay

PLC stands for Programmable Logic Controller

The assignment "PLC stands for Programmable Logic Controller" states that by definition, the PLC is a device that replaces the necessary relay circuits for machine control which operate in sequence (AutomationDirect.... The fourth internal area is made up of Input/Output devicesWhy were PLC's were invented/developed - PLCs were initially developed to meet specifications that were developed by General Motor's Hydra-matic division to replace relay-based machine control due to their use of latter logic programming....
1 Pages (250 words) Assignment

Fundamentals And Applications Of Programmable Logic Controllers

The paper "Fundamentals And Applications Of Programmable Logic Controllers" discusses a Programmable Logic Controller as a vital factor in industrial automation.... Programmable Logic Controller represents a vital factor in industrial automation.... Programmable Logic Controller provides all the three fundamental features that best deal with the varying industrial process thus the most effective in industrial automation.... Programmable Logic Controller are generally digital computers used in the automation of industrial processes, mostly, electromechanical processes....
2 Pages (500 words) Research Paper

Programmable Logic Controller Technology

"Programmable Logic Controller Technology" paper focuses on PLC, which dates back its origin in the 1970s and is very compact with an unsophisticated design and is the slightest expensive of PLC types on the market.... It includes all of the elementary features such as the CPU and I/O boards....
8 Pages (2000 words) Assignment

Programmable Logic Controllers

This research paper "Programmable Logic Controllers" presents a Programmable Logic Controller (PLC) that is a computer used in industries to supervise input variables and give corresponding outputs based upon the computational logic stored in it.... It gathers signals, does arithmetic computations, and works the stored logic upon signals to give output.... The logic or program in the form of a ladder diagram or likewise is stored in CPU memory....
2 Pages (500 words) Research Paper

Process Control Engineering - BP Kwinana Refinery

The paper "Process Control Engineering - BP Kwinana Refinery" gives details on the Programmable Logic Controller with the view to BP Kwinana oil refinery.... Some examples of process control engineering include the Programmable Logic Controller (PLC), which is a computerized control system utilized in industries to continuously monitor the condition of input devices and to control the condition of the output devices....
8 Pages (2000 words) Case Study
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us