StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Building a PC from Scratch - Assignment Example

Summary
The paper 'Building a PC from Scratch' states that building any PC is an easy task if all the steps are well executed. In this article it will assemble a simple powerful gaming PC. The next step describes the components one by one and how to install them…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER97.8% of users find it useful

Extract of sample "Building a PC from Scratch"

BUILDING A PC FROM SCRATCH

Building any PC is an easy task if all the steps are well executed, the first step is assembling the component to put together, these include the PC case, the motherboard, the CPU chip, the Power supply, the RAM chips, the Hard drives, the connecting cables, the Graphics Card, the DVD writer drive, and the cooling system [2]. in this article it will assemble a simple powerful gaming PC. The next step describes the components one by one and how to install them.

Precautions: always wear an anti-static wrist band or any anti-static preventer, the static can fry the computer components and it is important to prevent it [2].

Figure 1.1 wearing an anti-static wristband to prevent static while assembling

Part 1: Installing the Power Supply

The first and easy component to assemble is the power supply or PSU for short. Its position is in the rear of every case, to enable connection to the power cable. The PSU has two main points, the first is characterized by many cables and the other a switch and a female socket. The side with the multiple cables is to be placed inside while the side with switch and female socket placed facing outside.

Figure 1.2 the first image shows the switch and female socket, the second shows the many cables side,

  • Place the power supply on the case on the backside with a large opening similar to the power supply size.
  • Place the Switch and socket facing side facing outwards.
  • Screw into place the power supply (note: the screws depend on the casing used).

Figure 1.3 screwing the power supply into place, (note: after completing do not power it on)

Part 2: installing the DVD writer drive

There are different storage drives and the choice depends on the budget, motherboard, and use. The most popular are the SATA spinning disks or HDD for short (3.5”), and the newer smaller Solid-State Drives (SSD) (2.5”) [3]. in this manual we will be with the HDD drive, installed up high at the front of the case.

Figure 2.1 the location of the 3.5” drive slots on a computer case

  • Mount the HDD on the case and align the screw holes with the casing
  • Make sure the female data and power slots are facing inwards to the motherboard.
  • Once in place screw the drive into place.

Figure 2.2 placing the HDD into the 3.5” slot on the case

Figure 2.3 connecting the power and data cables to drive

Figure 2.4 connecting the data cable onto the motherboard

  • For the 2.5” installation some cases may have an enclosure but in another one must find a way to place them.
  • The best way is having a hard drive adapter to fit into the 3.5” slot.

Figure 2.5 placing the SSD onto a bracket holder in the 3.5” slot

  • Screw it into place

Figure 2.6 connecting the power and data cable to the SSD drive

Part 3: installing the GPU

The reason for a dedicated is not all motherboards come with a GPU, the modern GPU takes up the PCI-Express (PCIe) slot (mostly a white strip on the motherboard). The GPU used in this case is the Asus Strix GTX960 graphics card [4]. The process of installing the GPU is a straightforward process.

Figure 3.1 The GPU card and exterior (it is a PCI-E 16 pin card)

  • Place the graphics card on the PCI-E x16 slot on the computer motherboard, they are long black or white or blue slots as shown in the images below

Figure 3.2 the PCI-E 16 slots when placing the motherboard on the case they have open slots on the rear of the case.

  • Slide the graphics card into the PCI-E 16 slot as shown in the figure below.

Figure 3.3 placing the graphics card on the PCI-E slot on the motherboard.

Figure 3.4 placing the GTX graphics card onto the PCI-E 16 slot

Figure 3.6 screw the card into place to make it firmer on the motherboard.

  • In many instances most, GPU requires a power supply, like in this case the card will have a power connection cable and a slot on the side to connect the power cable.

Figure 3.7 connecting the graphics power cable to the GPU to supply more power to the card

Figure 3.8 the SATA Data and power cable respectively

Part 4: Installing the Optical Drives

Though on their journey out in the computing scene, there are still very vital in including them in the assembling. The optical drives usually have a 5.25” slot at the top front of the PC casing. The slots resemble the 3.5” drives slot and the installation process is similar. The best drive to install in this instance is the DVD writer drive, that supports all operating systems, and with a large disc writing a variety. The recommended at the time of this writing is the Samsung SE-506AB Blu-ray Re-writer [3]. The drive can write to a variety of discs such as Blu-ray, CD and DVD formats and can connect via eSATA and USB. Its dimensions can easily fit into almost all PC casings.

Figure 4.1 the DVD writer drive slot on the top front of the PC casing

  • Slide the drive into place as shown in the above figure, and align the screw holes with those of the casing
  • Screw the drive into place and connect the power and data cables

Figure 4.2 connecting the power and data cables to the optical drive

Figure 4.3 the SATA Data and Power cables respectively

Part 5: installing the Peripherals: Monitor, Keyboard, and Mouse

For the monitor choice and how to connect it, is based on the Graphics Card installed on the motherboard. In this case, the Graphics Card has multiple display slots, two HDMI slots, 1 DVI port, and a VGA slot. For the mouse, it must have a USB cord or a USB wireless connector.

Figure 5.1 the GPU card ports

Figure 5.2 the first is the DVI cable and the HDMI cable respectively

  • Connect the monitor to the power cable

Figure 5.3 connecting the monitor to the power and PC display port respectively

  • Connect the monitor to the GPU, HDMI or DVI cable

Figure 5.4 the cables and connection ports on the PC and monitor

  • Using a Monitor with an HDMI is recommended as HDMI has a capability to carry a true high definition video and audio over long distances without distortion. Additionally, it can render Blu-ray high-definition videos and other HDCP protects contents.

Note: The Monitor mostly comes with either a DVI or VGA connection cable and the HDMI cable you will have to purchase separately.

Figure 5.5 the HDMI connection on the monitor and the PC installed GPU

If the monitor has speaker the HDMI cable carries both video and audio hence, one can listen to audio files through the monitor.

  • The DVI port is analog. It only sends the video display to the monitor. In the monitor selection one should choose the DVI-I port as it carries both analog and digital signals, this port is most recommended.

Figure 5.6 the DVI connection on both monitor and PC GPU

  • Connect the Mouse to the PC via USB port

Figure 5.5 connecting the mouse to PC via USB cable

  • Similar to the mouse setting up the key can be connected via USB.

Figure 5.6 connecting the Keyboard to PC via USB cord

Part 6: setting up the BIOS

Once every hardware component is installed successfully in their right place, power on the newly assembled PC and long press either F2, F9 or F12 on the keyboard while it is still powering on [1]. The special keys mentioned above are the access to the PC BIOS settings. The BIOS settings screen is unique to each motherboard or motherboard brand.

Note: be careful what you change in the BIOS settings, once changed it may work or fry the PC [1].

Figure 6.1 a common BIOS setting screen

  • To enter the BIOS configurations screen, press the power button to boot the PC
  • While booting the PC press either F2, F8, F9, or F12 to enter into the BIOS settings screens in other pressing F12 would enter into the BIOS boot order menu, still one can navigate to the BIOS screen from here.
  • When done editing the BIOS settings save or discard changes.

Figure 6.2 saving the BIOS settings

Read More

CHECK THESE SAMPLES OF Building a PC from Scratch

The CTV Building Disaster

A very important note in this milieu has been explicitly mentioned by Isaac Davison from The New Zealand Herald:'The Royal Commission also found that after the first major quake in September 2010 the CTV building was "green-stickered" by a rapid assessment team and later by three council building officials, none of whom was an engineer.... The author of the paper "The CTV building Disaster" tells that the analysis of the CTV building can be divided into four main parts....
7 Pages (1750 words) Assignment

The Global Impact of Wireless Network System on the Individuals and the Society

Customary mobile phones do not fall inside of the meaning of a pc device; in any case, more up to date phones and even sound headsets are starting to fuse figuring power and network adapters.... The use of a wireless network enables enterprises to maintain a strategic distance from the costly process of bringing cables into buildings or as an association between distinctive gear locations.... As the report stresses numerous types of wireless correspondence systems exist; however, a distinguishing quality of a wireless network is that correspondence takes the spot between pc devices....
5 Pages (1250 words) Assignment

Benefits of Intelligent Infrastructure on Us Buildings

The essay highlights some of the intelligent infrastructures installed in buildings as well as the benefits accrued from the use of such infrastructures in US buildings.... According to Igoe, an 'intelligent building' is made up of 'sensors, switches, and systems contained within the infrastructure of the building (that) are networked, communicating with each other and with a human operator through a control interface' (2007, p....
6 Pages (1500 words) Essay

Fire Blasts and Their Causes

It's really hard for Minnear to imagine that a pc could be a cause of the burning of his house.... Minner had bought the pc about 2 years ago, with the knowledge that this model is said to have a list of potential battery problems.... As Dell is one of the largest pc makers of the world, so it may be bad for their image but definitely they know how to maintain quality....
10 Pages (2500 words) Case Study

Fire Protection

The spread of fire in and around the building will be by the Convention of the air resulting from natural ventilation openings like the air conditioning ducts, the windows, and the doors if they are open at the time the fire starts.... Conduction of fire through the concrete and the steel walls may cause the diffusion of heat from one side of the wall to the other and the surrounding buildings.... Radiation: Solar radiation from the shiny uPVC window frames and the heat radiating from the concrete and steel materials on the structure may assist in fire spread....
9 Pages (2250 words) Assignment

Significance of Tests and Properties of Concrete

Concrete is the one main material used in construction and building whose delivery to the construction site can be done in the plastic state.... This research proposal "Significance of Tests and Properties of Concrete" describes reports involving the exercise of concrete sample preparation, aggregate grading testing as well as compressive strength testing performed on various samples of concrete....
6 Pages (1500 words) Research Proposal

Suitability to Construct the Building

"Suitability to Construct the building" paper outlines the science and a range of construction material available for application in the construction of the development of estate housing project to underline the suitability of our company for this housing project.... his entails integrated engineering solutions whereby the building components alongside service functions are incorporate into one common system so as to attain optimal cost and environmental performance as illustrated in the diagram below....
7 Pages (1750 words) Coursework

Fire Safety and Building Environment

The disco jockey was reported to have opened the door that led to the southeast stairwell and this resulted in smoke from a fire in a stairwell gaining entry into the hall.... This assignment "Fire Safety and building Environment" focuses on a fire that took place in December 2009 and the fire was reported to have started at 1 a.... The building had a series of eight windows located on the northeast wall, six of them being on the wall itself....
19 Pages (4750 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us